June 29, 2025

Best fume extraction arms supplier UK

Premium fume extraction arms online shop UK: LevSupply has great expertise in designing and executing welding fume extraction systems for Robotic Welding or Automatic Welding operations. LevSupply’s wide range of products helps you find the most convenient solution. Deciding whether a portable is the best fit for your application depends on the application itself. One advantage of the portable is that it is source-capture and can travel between workstations. One downside of the portable is that (by the nature of it being portable) the amount of filter media we can fit in the unit is limited. You should ask yourself if the portability benefit is worth the reduction in filter life. Sometimes this is unavoidable, especially if you are welding on large pieces, in many different spots, etc. See more information at exhaust fans provider UK.

At LEV Supply, we are dedicated to providing high-quality solutions for the extraction of fumes, dust, and other airborne contaminants. With years of experience in the industry, we specialise in supplying and installing a wide range of extraction systems tailored to the unique needs of our clients. Our mission at LEV Supply is simple: to create healthier and safer working environments by effectively controlling and eliminating airborne pollutants. We believe that every workplace deserves access to reliable extraction solutions that not only protect the health and well-being of employees but also enhance productivity and efficiency.

Look for ways to create more efficiencies in the welding process. This includes examining such things as wire diameter, wire feed speed, voltage, travel speed, gas type, transfer mode, etc. For instance, if the shop is currently welding with a short arc process and a 75/25 blend of shielding gas, it may be more effective to switch to a different gas and a spray mode of transfer. Or, a change in process may be warranted based on the condition of the part. If there is oxide on the part, it may be easier to change to a process that will overcome contamination problems rather than try to clean each part before welding. Your welding supplier should be up to date on the latest technology and be able to advise you on new processes, machinery and consumables that can optimize welding at the shop. In some cases, it may be better to double bevel a joint to prepare it for welding rather than single bevel it. It is recommended to double bevel any material that is more than 3/4″ in thickness. Just this simple change in procedure can save quite a bit in weld metal. On a 3/4″ thick piece, a double bevel will use 1.45 lbs. per foot of weld metal while a single bevel will use 1.95 lbs. per foot.

If value for money is a priority to you, take a look at this drill from Evolution. It is a solid and durable drill that will get the job done for the professional steelworker as well as the weekend handyman. This drill has a 6-inch stroke length and comes with a 0.5-inch chuck and key. The drilling range has a diameter from 7/16? to 1-1/8? and cutting depth of 2 inches unless you change out the chuck to something else. You can place the feeding handle on either side of the drill, depending on what is comfortable to you. The heavy-duty magnet makes it easy to do overhead or horizontal drilling. An integrated cooling system will keep your magnetic drill press from overheating. There are some drawbacks to this drill. It can only turn at the speed of 570 RPM. This works great for when you are drilling steel or aluminum, but this speed is too high for drilling titanium or stainless steel. This drill may also be more primitive than conventional high-end magnetic drill presses.

It’s also worth looking into how your welder will handle things like short-circuiting. If a short circuit issue occurs while you’re welding, you don’t want a surge of power to ruin your work. Fortunately, there are many welding companies that implement strategies in their devices to eliminate the risks of short circuits. To choose the correct portability, size and weight for your welder, you’ll need to think about what you’ll need the machine for. If you’re going to be carrying it around a lot, then you need something that’s going to be highly portable and lightweight. Just make sure that a reduction in weight doesn’t mean that you end up compromising on power or performance.

Our vision and our distinct set of values drive the success and spirit of our organization. At ESAB, under Colfax leadership, we live our values. As a premiere U.S. welding equipment manufacturer, our vision and values help us to make strategic decisions, allocate resources, and focus our choices every day, domestically and internationally. ESAB offers a world of products and solutions for virtually every welding and cutting process and application. We serve industries that serve the world. The Best Team Wins – Team-oriented, involved associates are our most valuable resource, and we are passionate about attracting, developing, and retaining the best talent. Living this value is done in three primary ways: 1. Building the right team – having the right people to do the job; 2. Creating the right environment – making sure that leaders create an environment where all associates can contribute, and 3. Getting the win – when you have the right people and right environment – it makes getting the win a lot easier!

These welding tables are manufactured to the highest standards in Poland, Europe by GPPH. GPPH’s range of welding benches and tables are laser cut for precision and are used in every branch of industry. These welding tables offer perfect flatness (+/- 0.5MM) & are made from 15MM thick S355J2+N grade steel. The hole system that these welding benches offer make precise construction a much quicker process when used in conjunction with the optional tool sets. Batch work processing times can be cut in half when you eliminate the measure and exact angle arrangement of individual parts – this makes producing the same item simple and fast.

Forney have built a simple, mid range MIG welder that’s solid and reliable. It has some good power for the price but doesn’t have as good a duty cycle as the Hobart 190 or Lincoln 180. Forney aren’t one of the big three brands but this machine is still solidly built and I’d feel comfortable buying this. If you want a basic 220v welder without any special features, this is a good choice. Read the full review here.

The Autojack MIG100 has its flaws but none of them make a convincing enough case to prevent the model’s appearance on our list. It’s a good product for a lot of different reasons. First, it incorporates 4 stage power settings. Add to that the variable wire speed control and you have yourself a truly versatile tool. The internal turbo fan cooling system here is represented by an oversized blower that circulates air at a higher speed. The air vents on the sides of the model are also larger than average, a design solution that improves heat dissipation. Having said that, what we like most about this MIG welder is probably just how suitable it is for people with different levels of expertise, from beginners and hobbyists to experienced welders and professionals.

UK market choice: Metal inert gas welders—also known as MIG welders or gas metal arc welders (GMAW)—are the most commonly used welding machine, competing with the also successful TIG (tungsten inert gas or gas tungsten arc welding) and stick welders. For both at home and industrial use, metal inert gas MIG welders are known for their efficiency at fusing all kinds of metals together. Dependent on your welding skill level, whether you’re experience or looking to start welding; a metal inert gas level could be a process you’d want to try out.

Never drag, roll, or drop cylinders during the use. Always take care to maintain the valve caps during the transport. Avoid lifting the cylinder using a valve cap. Never store the cylinders for a long time period. Gas cylinders should only be purchased in small quantities. Never store them for long time periods. It is important to follow extreme precautions and safety measures while working with industrial gas cylinders due to several hazards and risks posed by them. Sourcing these cylinders from a reliable manufacturer is the most important safety measure for any facility owner using these cylinders.

Adjustable Extraction Tips and 150 CFM Airflow. With 110V power, the portable fume extractor can generate 150 CFM airflow with its 2.3 HP motor. You can adjust the tips of extraction as per your welding requirements. Efficient Dust Collector and Suitable for Various Welding Tasks. I’ve found the dust collector in this weld fume extractor to be quite effective. You can even buy an additional hood for specialized uses. The S130/G130 generates 75 dB sounds when it runs on full power. You can efficiently use this machine for MIG welding, GMAW, stick welding, and gas metal arc welding.

Diluter systems are an option when at source extraction may not be practical. These stand-alone systems are typically used in large workshops where crane transportation is present, and ductwork is difficult to install. Diluters continuously filter and recirculate cleaned air into workshops to control welding fume concentration levels. Diluters are commonly used in conjunction with local fume ventilation systems as part of a complete welding shop ventilation system. Proper fume extraction can help reduce employee sicknesses such as metal fume fever. Demonstrating a commitment to employee health and well-being will also help attract and retain a highly-skilled workforce.

Oxy acetylene welding machine uses fuel gas along with oxygen as the heating medium. In this type of welding machine, the flame is considered to be the main element that is produced at the end of the torch. This flame melts the base metal and potential filler to form a continuous weld. This machine is best for thin materials and does not work well on thick materials. An operator can effectively control temperature and weld beads using this machine. These welding machines are mainly used all over the world as it is relatively low cost and the machines are portable. In the end, I conclude that welding is a process of joining two metals. To do this, the welder must use a welding machine appropriately to achieve welding requirements. So, if you are a welder, you must know these welding machines to weld correctly.

Here’s a lot of welder for the money. The Eastwood MIG 135 industrial Welder features infinite adjustment from 25-135 amps, enough range for 24 gauge sheet metal to 1/4-inch steel plate. It has infinitely adjustable controls and a setup chart on the case cover. It’s also spool gun compatible, giving you the option for 1/4-inch aluminum. The Eastwood MIG 135 industrial Welder mounts 4-inch and 8-inch wire spools, but the wire drive is plastic instead of metal. One other issue with the wire drive is that you’ll need to buy a drive roller if you run flux core wire instead of MIG. Eastwood included the gas regulator and hose for MIG capability, however. It’s got an industry-standard Tweco-style MIG gun for easy-to-find consumables. The connection leads could be longer, but the Eastwood MIG 135 industrial Welder is a versatile, easy to use machine for a great price. If you’re building roll cages or doing chassis work, then you’ll want the model up, the Eastwood 175 Amp MIG Welder is a great 240 volt option that includes the spool gun for aluminum capability right out of the box.

High quality fume extraction online supplier United Kingdom

Top welding fume extractor shop United Kingdom: The optimal strategy for managing airborne contaminants in the workplace involves capturing them directly at their source, thus preventing their dispersion into the surrounding air and away from the breathing zone of employees. LEV Supply offers a range of self-supporting fume extraction arms, renowned for their cost-effectiveness and efficiency in local air pollution control. Our lineup includes advanced options such as the Oskar tube arm, Oskar stainless steel tube arm, Tele 160, as well as the economical Econ 160 arm. Available in diameters ranging from 75mm to 200mm, our fume extraction arms cater to a wide spectrum of airflow requirements. Standard models typically provide coverage of up to 4 meters, while our Oskar Extension Booms offer extended reach capabilities of up to 10 meters. Oskar remains committed to providing innovative solutions that prioritise worker safety and environmental protection, ensuring workplaces are equipped with reliable and effective air pollution control measures. Read extra details on oskar 160 fume extraction arms supplier UK.

You know that it’s important to capture toxic particulate from weld fumes before you can breathe it in. But what if you or your welders are moving around and a stationary unit doesn’t have the reach or coverage for your work? Portable and mobile fume extractors are an excellent solution when factory space is limited, budgets are limited or welding tasks don’t require large fume extraction units. Larger facilities with heavy welding operations might require a more in-depth solution. Extraction hoods could be used for areas where regular welding occurs. If a duct system is not available, other systems might be used such as a diluter system.

ESAB is a world leader in the production of welding and cutting equipment and consumables. Our innovative, world-renowned equipment and solutions are developed with input from our customers and built with the expertise and heritage of a global manufacturing leader. For each discipline, continuous development of methods, materials and know-how is being directed to meet the challenges posed by the diversity of industry sectors we serve. ESAB is organized to deliver efficient, high-productivity solutions to meet customer requirements in a manner that exceeds their expectations no matter the market segment. Continuous Improvement (Kaizen) Is Our Way Of Life – Set breakthrough objectives, experiment and learn every day, eliminate waste in our business processes, and benchmark the best, then better them. Living this value is done through understating that Change is a Must, and the use of Tools for Improvement. To live this value each ESAB associate fosters an environment of continuous learning employing the Colfax Business System Tools which is the basis of our culture.

Our welding tables are to be self-assembled. This is an easy process; full instructions are provided. A wide range of tools are available for use with these tables and they are available as added optional extras in the custom options above. If you require guidance on which tool set would be the most suitable for you please feel free to call our helpful staff. *Please note that current lead times on these welding tables are 3-4 weeks, however if you require the table quicker please alert us and we will do our best to assist with your enquiry*

The Lincoln EasyMIG 180 is a well-built welder that’s reliable and will serve a range of light fabrication and workshop projects. Its power input is 230V but it doesn’t have the power of the Hobart 190. This is a great entry level 230V welder that will give you quality welds. It won’t tackle thicker metal but this will do the job for most hobby welders. It’s a great choice for a hobbyist if you have a convenient 230V power outlet.

The people behind Display4top market this particular model as a professional MIG welder and we can’t say that they make a poor case in that regard. For one, its duty cycle is definitely up there. With its 48A rated output, the model is able to work for 6 minutes straight before overheating. It comes equipped with a variable wire speed control trigger, so you’ll be able to efficiently work with different metals. There are two power settings and an Ampere knob, further making the versatility case. More importantly, the model is as durable as they come. The forced air cooling system keeps the temperature at a nice, practical level. On top of that, the welder incorporates a thermal overload protection system that will be able to pick up the former’s slack in case it fails to do its job.

UK market dive: Through our extended research of these particular welders, we found dozens of videos and articles and reviews to guide the viewer through the process of buying, setting up, and using these machines. We hope this buying guide will help you in choosing the welder that most suits your needs. After further explanations of the welding process and what to look for when buying, there will be a list of ten well-known metal inert gas welders that will each be reviewed briefly.

Store the Cylinders Correctly: The cylinders should be stored in a dry, ventilated, and well-drained area, and away from ignitable and inflammable materials. Empty cylinders must be stored separately. OSHA also mandates the facility owners to store oxygen and fuel gas cylinders separately. The storage facilities should display proper warning signs for people regarding the dos and don’ts in the area where the cylinders are stacked. Always take care to store acetylene gas cylinders, as well as other compressed gas cylinders vertically. In addition to the above, the following should be practiced while handling the compressed gas cylinders. The cylinders feature tags, markings, or stencil marks for easy identification. Never deface or tamper these identification marks while using the cylinders.

Arc welding includes some of the most well-known welding processes and these are most likely what come to mind when visualising the welding process in general. In these processes, an electric arc generates heat between the electrode and the metal to be welded. The electrode may be consumable or non-consumable, and its power source can vary from alternating (AC) to direct current (DC). Gas metal arc welding (GMAW), also known as MIG/MAG welding (metal inert gas/metal active gas), uses a continuous wire electrode fed through a welding gun. As the electric arc melts the electrode wire it is then fused along with the base metals in the weld pool.

The Hobart Ironman 240 is the updated version to the Ironman 230 that recently has been discontinued. The 240 is a well-reviewed welder that delivers a wide range of power from 30 to 280 amps in a heavy-duty American-made chassis. Hobart equips the Ironman series with its “soft arc” technology for an easier striking, more spatter-free arc. If you are looking to weld aluminum, then like most of their MIG welders, they offer the package with a SpoolRunner 200 spool gun found here, for a few hundred extra bucks. This is a full-sized platform, offering a 15-foot gun connection and able to load a 44-pound spool of wire. Hobart backs the Ironman 240 with a strong five-year limited warranty. The power regulator has 12 notch settings for easy feel when setting the power level with gloves. This power regulator knob seems to be a problem for some users who have reported issues with the knob rotating freely and not changing the power setting. The only downside to this model is that it is unable to run directly off of a generator as it causes problems with the SCR firing timing of the welder. This makes it a bit less portable than some other welders, but nothing you can’t work around. Overall, this is a quality industrial-grade welder which is ideal for farm work which has been compared to Miller 252 – just without the digital screens and a few other features that most people wouldn’t need, but costs a lot less making it excellent value for the money.

Whether you’re a professional contractor or a DIY enthusiast and looking for a metal-cutting tool, this disc is a must-have. The cutting wheel is a great way to quickly cut through metal. With 52 wheels, you’ll always have one on hand. It is compatible with all 4-1/2 inch (115mm) angle grinders with 7/8 inch (22.2mm) arbor. The thickness of the wheel is 0.045 inch (1.2mm). You can operate this up to 13,300 RPM When it comes to precision and burr-free cutting, the Truswe Metal and Stainless Steel Cutting Wheel for Angle Grinder is tough to beat. This ultra-thin design delivers fast and accurate performance, with minimal material loss. The Metal Cutting Discs are made of aluminum oxide grains which are more safe than other wheel types. These discs should only be used when wearing all applicable safety gear because they can fly off the wheel and injure you if not careful. You should read the instructions before using this power tool. It is a heavy duty cutting disc that is fitted to any angle or side grinder. It will cut with ease through sheet metal, plastics, fiberglass, Plexiglas, ceramic tiles and even rubber.

One of the “cardinal sins” that almost every shop commits is over-welding. This means that if the drawing calls for a 1/4″ fillet weld, most shops will put down a 5/16″ weld. The reasons? Either they don’t have a fillet gauge and are not exactly sure of the size of the weld they are producing or they put in some extra to “cover” themselves and make sure there is enough weld metal in place. But, over-welding leads to tremendous consumable waste. Let’s look again at our example. For a 1/4″ fillet weld, the typical operator will use .129 lbs. per foot of weld metal. The 5/16″ weld requires .201 lbs. per foot of weld metal – a 56 percent increase in weld volume compared to what is really needed. Plus, you must take into account the additional labor necessary to put down a larger weld. Not only is the company paying for extra, wasted consumable material, a weld with more weld metal is more likely to have warpage and distortion because of the added heat input. It is recommended that every operator be given a fillet gauge to accurately produce the weld specified – and nothing more. In addition, changes in wire diameter may be used to eliminate over-welding.

How to pick a welder tips: Fan on demand: Lowers running costs and reduces contamination to internal components. The fan kicks in when it’s needed, rather than running all day. Printed Circuit board protection: If the machine’s PCB’s are protected from dust & kept away from the fan, reliability will increase. Some manufacturers’ have the parts that need cooling in a duct type housing & the PCB isolated separately. Step voltage settings: If you’re looking at step voltage conventional MIG with multiple power settings – “the more the better!”

Power tool pioneers Bosch have been in the game since 1886. They certainly know a thing or two about making one of the best corded angle grinders on the market. I was amazed at the power output and precision you can achieve with the GWS 7-115 angle grinder. Starting off with the look and feel of this grinder, it’s surprisingly slimline and lightweight. It’s certainly easy to hold on to and weighs less than 2 kg. Bosch have made use of a clever 20° angle side handle as well for ultimate precision grinding. Making use of one of Bosch’s brilliant 720 Watt Champion motors, you know this is a tool that’s built to last. Everything is chunky and built for hard work. They’ve included a two-stage safety switch to avoid accidental starts, which is essential for any tool like this. The motor spins a 115 mm cutting disc up to an impressive 11,000 rpm. There’s a relatively low amount of vibration when in use as well. Just 6.5 m/s², which isn’t bad at all for corded grinders. I like the fact that Bosch have flattened the gear head. This reduces the overall size and makes it easy to get into tight spots. If you’re looking for one of the best angle grinders from one of the top names in the business, this is a great choice.

Several tips on welding equipment, MIG and TIG welders, plasma cutters. Identify the types of welding projects and materials you will weld most of the time. Are you creating metal sculptures? Do you intend to restore an old muscle car in your garage? Does the motorcycle you bought years ago require some fabrication? Maybe you need to do basic repair on farm equipment. Taking the time up front to identify the projects that will occupy the biggest percentage of your welding activity will help you determine the specific thickness of metal you will likely weld most often — and ultimately help you select the most suitable welder. Time to get a bit more specific. Let’s take a look at what welding process you can use for each metal type. Keep in mind that many of these materials are also processed using varying combinations of two or more metals to reinforce strength and functionality.

This portable weld fume extractor weighs 50 pounds only and features a 16-foot flexible wire. I’ve found the wheels to be extremely useful to move it around anywhere I need. It’s perfect for people who want something efficient but highly portable as well. The S130/G130 is an excellent option for manual welding around the house and store. Adaptable and Durable. The S130/G130 is a highly adaptable and powerful welding fumes extraction system in a small size. This unit can be used at welding school training due to its compact build quality and efficient fume extraction system. The 16-inch hose that it comes with is enough to cover any small to medium area. The machine is made with high-quality steel that makes it sturdy and durable.

This drill has a powerful 9 Amp motor, high-end 2-coil magnet, and compatible with ¾” diameter shank annular cutters. To start off, this drill is very proud of how easy it is to handle. It weighs a mere 26.5 pounds and it has a conveniently located handle, making uncomfortable drilling positions more bearable. It has a straightforward 2-button control panel that is also conveniently located and easy to use. Other perks that you get with this drill is a hard case and, depending on where you buy, you may also receive a kit containing German-made annular cutters. Like some of the other drills in this list, you can also fit the feeding handles on either side of the drill, depending on what is ergonomic and comfortable for you. This drill also has an easy to turn off feature to add an element of safety to your drilling. This button is big and easily accessible. This is a solid drill that is perfect for all handymen.

Even best welder for home use may not be enough for someone who plans on using their MIG welding skills in the workplace. If you’re looking for a high-quality machine that’s ideal for industry-grade jobs, then the Sealey SuperMIG180 may be an excellent choice. Designed as a professional car welder, the SuperMIG180 model is ideal if you’re welding with Argon and CO2. This high-quality model comes with a forced-air solution for cooling inside to make sure that you can extend your welding times without overheating. There’s also a non-live torch fitted into the system so you can reduce the risk of potentially creating arcs when you’re on the move between fast-paced job. Because it’s a professional-level welder, the Sealey SuperMIG also comes with a high-level CO2/Argon regulator, so you can limit your risk of dangerous mistakes as you work. Perhaps one of the easier-to-use small MIG welder options on the market, the Sealey model is very straightforward, particularly for professionals. Although it’s designed for high-level use, there’s nothing to stop you from making the most out of your system within your workshop too. The set comes with an industrial gas regulator, 2 contact tips to choose from, as well as a gas cup.