High quality magnetic track light provider: If you’re in a hurry to buy exterior lights, you might be tempted to spend as little time as possible researching your choices. However, this is something that you should avoid at all costs! Don’t just browse through a couple of sites and then buy the first product that catches your eye. Instead, pay close attention to the details of each individual fixture before choosing one. Most LED landscape lights can connect with one another to create a “string” of light fixtures along your property line. However, incorrectly connecting fixtures – or even the incorrect number of lights in a string – can cause the bulbs to burn out prematurely. In addition, you will end up paying more than necessary for energy consumption. Instead, talk with your local electrician about which lights are compatible for creating “strings” and use the recommended number of bulbs in each string. Read extra information at https://grnled.com/best-led-panel-light-manufacturer-in-china.
Confirm what design pattern for the whole system you prefer. There are about 4 design shapes for the whole lighting system- L shape, I Shape, parallel lines Shape, and Square shape. Square shape. It is suitable for living rooms, and offices. U Shape: Mainly used for living room. L Shape: Good for use in corridors, living rooms, and cloakrooms. I Shape: For the living room, dining room, and kitchen room. Choosing a suitable magnetic track rail: Recessed magnetic track: It is suitable for new houses that have not yet suspended ceilings. It is necessary to make grooves and pre-embed tracks, and then press them with the ceiling. Trimless magnetic rail: It is used in the room where the ceiling has been made, and the hole is directly fixed on the ceiling plasterboard. Surface / Pendant magnet track: Mainly used for places that are without false ceilings or not good for making plasterboard such as supermarkets, offices, etc.
When choosing exterior led floodlights, lumen value is more important than power value. Power value (Wattage) measures the energy required to illuminate the product, and lumens determines the brightness of the lamp. This means that the more lumens of the product, the brighter the lamp. Consumers should not choose projection lamps based on the power value (watts), but should consider how much brightness (lumens) they provide us.
Explosion proof flood LED light: It refers to a floodlight used in dangerous places where combustible gas and dust exist, and can prevent arcs, sparks and high temperature that may be generated inside the lamp from igniting combustible gases and dust in the surrounding environment, so as to meet the requirements of explosion-proof. It belongs to a special kind of lamp, and its protection level is higher than that of conventional floodlights. Suitable for various indoor and outdoor operations and construction sites such as flammable and explosive places, oil fields, offshore oil platforms, ships, metallurgy, petrochemicals, etc.
How many watts is a solar street light? The wattage of a solar street light can vary greatly depending on the size and type of the light. Generally, a solar street light will range from 10 to 150 watts. What are the disadvantages of solar street lights? High Initial Cost: Solar street lights require a significant upfront investment. The cost of a single solar street light can range from $2,000 to $5,000, depending on the size and type of the light. LED street lamps emit white light when the color temperature is around 5000K, and yellow or warm white light when the color temperature is around 3000K. In fact, yellow light or warm white light around 3000K is more suitable for road lighting, while the color temperature of LED street lights around 5000K is not suitable for road lighting. Because the color temperature of 5000K will make people feel very cold and dazzling, which will cause people’s vision to be overly fatigued, and under this color temperature condition, people’s ability to observe in the distance will also decrease, reducing the driving safety of drivers. In addition, in rainy and foggy weather, LED street lights with a color temperature of 5000K have poor penetration ability, which also affects the travel safety of pedestrians.
High lumens. most of them are about 100lm/W output. Even it can be up to 150lm/W output for best outdoor flood lights in markets, saving much more 80% energy than traditional halogen flood lights or HPS floodlights. Longer lifespan. The service life of LED reflector light is at least twice as long as that of a traditional projection lamp, which can reach 50000hrs. The outdoor led projection light produced in 2013 is still in normal operation, and its service life has exceeded 7 years. Technical Support: It is ok to support IES files to do Dialux simulation, providing installation, maintenance guidance, or technical training and lighting design solutions.
GRNLED (Golumen) is the best magnetic track lighting manufacturer, factory, and supplier in china since 2018, with ISO9001:2015, providing high-quality magnet track light with Osram, Philips chips, and 2.4G TUYA WIFI, BLUETOOTH, ZIGBEE smart magnetic track lighting system with low voltage DC48V or 110V/220-240VAC input voltage at a competitive price. Our magnetic linear track lights have been CE RoHS approved. It is ok to do ETL, UL, CSA, SAA, and CB magnetic track lights if needed.
We are the best industrial Led Floodlight manufacturer, factory, and supplier in China. The following floodlight types’ light sources can be both SMD and COB-led chips. They are all at competitive prices and have stable quality. Most of them are with a high-quality constant current isolated driver, PF>0.9, surge protection up to 2KV-6KV, 2/3/5Years warranty. The materials adopt an aluminum heat body and toughed glass cover, Protection grade up to IP65 and IK08. Widely used as industrial lighting for construction sites, factories, and tunnels, or as outdoor landscape lighting for external walls, tree lighting.
What are the advantages of solar powered street lights? Cost Savings: Solar-powered street lights are much more cost effective than traditional street lights, as they require no electricity or wiring. Eco-Friendly: Solar-powered street lights are powered by renewable energy sources, making them an environmentally friendly option. Low Maintenance: Solar-powered street lights require minimal maintenance, as they do not require any wiring or electricity. Durability: Solar-powered street lights are designed to withstand harsh weather conditions, making them a durable and reliable option.
Third, the temperature of the LED flood light is too high. Generally, this kind of light appears in the LED flood light fixtures with built-in power supply. If the driver has an over-temperature protection function, and the material heat dissipation performance of the lamp cannot meet the requirements, the driver over-temperature protection will start to work and there will be flicker, for example, 20W floodlight housing is used to assemble 30W lamp, in this case, the heat dissipation will be too bad to working well. See even more information on https://grnled.com/.
OEM ODM Service, we can do production or design according to customer’s requirements with much more experience than expected. We always keep the innovation in function and technology for all led lights, producing the best-led products which are popular in markets. And also provide relative technical support, for example, the IES Files to do Dialux simulation or technical training, etc. We will do all legal things for our customers.